Standard Features
• Made from .125 thick diamond plate aluminum
with 3/4" radius bends for increased strength
• (3) baffles per tank made from .125 aluminum
• (2) 2" NPT weld spuds per tank
• (1) 3/8" drain plug
• (1) pre-vent cap and base included
Additional Information
The safety capacity is the minimum capacity
of the tank when filled to the bottom of the bung fill
tube. This allows for expansion of the contents in warm
weather.
This liquid transfer tank
is not designed to be connected to a vehicles fuel supply
system. It does not meet the requirements of Title 49
of the United States Federal Register governing transportation
or Transport of Canada regulation CGSB 43.146 governing
transportation of dangerous goods.
The tank must be vented at all times for expansion and
to prevent vacuum formation during liquid removal.
The tank must be securely bolted to the truck.
Do not pressurize the tank over 6.0 psig.
The tank is to be lifted only when empty.
This tank is intended to be used with combustible fuels
only (such as diesel fuels with flash points greater
than 38 degrees C / 100.4 degrees F. This tank is not
designed for flammable fuels such as gasoline. |
